SUPPORTS
Caratteristiche dei supporti Carte da Parati
COMPOSITION : NON WOVEN fab VINYL
COATINGWIDTH : 106 cm
CERTIFICATION : B -s2 -d0
WEIGHT : 235 GR / SQM
MAINTENANCE :
a) use a sponge from the soft side (or a slightly humid rag) with warm water.b) remove residuals rapidly.
c) industrial products and detergents are not recommended.
CANVAS
COMPOSITION : FRONT CE/ PES – BACK NON-WOVEN fab.
WIDTH : 115 cm
CERTIFICATION : B – s1 – d0
WEIGHT : 147 GR / SQM
PVC FREE
MAINTENANCE :
a) Use a sponge from the soft side (or a slightly humid rag) with warm water.b) remove residuals rapidly.
c) do not use detergent or industrial products at all.
DRAWING PAPER
COMPOSITION : 100% FIBER GLASS
WIDTH : 100 cm
CERTIFICATION : B – s1 – d0
WEIGHT : 175 GR / SQM
PVC FREE
MAINTENANCE :
a) use a sponge from the soft side (or a slightly humid rag) with warm water.
TIGHT GEOMETRIC PLOT
COMPOSITION : NON-WOVEN fab. VYNIL COATING
WIDTH : 106 cm
CERTIFICATION : B – s2 – d0
WEIGHT : 235 GR / SQM
MAINTENANCE :
a) use a sponge from the soft side (or a slightly umid rag) with warm water.
b) remove residuals rapidly.
c) industrial products and detergents are not recommended.
SOFT- ROUGH
COMPOSITION : NON-WOVEN fab. – lamined silver and silk yarn
WIDTH : 108 cm
CERTIFICATION : C – s1 – d0
WEIGHT : 200 GR / SQM
PVC FREE
MAINTENANCE :
a)use a sponge from the soft side (or a slightly humid rag) with warm water.
b)Remove residuals rapidly
c) Do not use detergent or industrial products at all.
PEARLED/METALLIC
COMPOSITION : 50%CE, 30%PES, 20%MI
WIDTH : 90 cm
CERTIFICATION : B – s2 – d0
WEIGHT : 300 GR / SQM2
PVC FREE
MAINTENANCE :
a) microfibre cloth, light use.
b) no liquids or detergents.
PEARL/BRUSHED EFFECT
COMPOSITION : 100% VISCOSE
WIDTH : 90 cm
CERTIFICATION : B – s1 – d0
WEIGHT : 300 GR / SM2
PVC FREE
MAINTENANCE :
a)cotton microfiber cloth, light use.
b) no liquids or detergents.
SPUN SILK
LEGEND
LEGEND
WASHABILITY
WASHABILITY
WATER RESISTANT (during treatment)
Fresh spots of glue can be removed with a sponge wet.
WASHABLE
The light marks can be removed with a sponge wet.
RESISTANT TO WASH/
Dirt can be removed with a sponge and neutral soap (excluding oil, grass).
RESISTANT TO ABRASION
marks which may be waxing in water, can be removed with a neutral soap or a detergent. and a sponge.
VERY RESISTANT TO ABRASION
Marks that are dissolvable can be removed with a neutral soap or delicate abrasive detergent and a sponge.
LIGHT RESISTANCE
LIGHT RESISTANCE
LIGHT RESISTANCE | SUFFICIENT
LIGHT RESISTANCE | MEDIUM
LIGHT RESISTANCE | GREAT
LIGHT RESISTANCE | VERY GOOD
LIGHT RESISTANCE | EXCELLENT
MATCHING
MATCHING
NO RATIO/FREE MATCHING
It is not necessary to pay attention to drawing while applying the paper.
STRAIGHT RATIO
Drawings must be applied at the exact same height, next to each other.
REVERSE APPLICATION
Each roll must be applied on the opposite side compared to the previous one.
SKIPPING RATIO
The drawing on the upcoming roll must be placed staggered according to the indications supplied.
APPLICATION
APPLICATION
GLUE APPLICATION TO THE WALLPAPER
Glue must be applied to the back part of the wallpaper.
GLUE APPLICATION ON THE WALL
Glue or adhesive is to be applied directly on the wall, NOT on the backside of the wallpaper.
PRE-GLUED PARATS
The backside of the parats are impregnated with glue, which gets activated through the use of water.
PEELABLE
The superior part of the parat can be removed from the wall with a dry treatment. The lower part of the parat stays on the wall as substrate.
PEELABLE
The superior part of the wallpaper can be removed from the wall with a dry treatment.
The lower part of the wallpaper stays on the wall as substrate.
WET REMOVING.
The wallpaper must be fully moistened and removed with a brush.
OTHER
OTHER
WALLPAPER WITH DOUBLE EMBOSSING
High quality embossing is made by the two layers of hidden paper.
STRIKE RESISTANT
This symbol is used for special and particularly resistant relief, with hard-elastic surface.
OVERLAPPING AND DOUBLE CUT
For heavy and smooth wall coating. Each new sheet overlaps on the previous about 5-8 cm.
On the overlapping point, the two sheets are hand-cut with a work blade. freehand.
HARDLY INFLAMMABLE
According to DIN 4102, hardly inflammable.
- Non-combustible material: class 0
- Hardly-combustible material: class 1
- Hardly-combustible material: class 2
- Flammable fuel material: class 3
- Easily flammable fuel material: class 2
- Extremely easily flammable fuel material: class 5
Non-combustible materials: A1
Hardly combustible materials: A2-s1-d0; A2-s1-d1; A2-s2-d0; A2-s2-d1; A2-s3-d0; A2-s2-d0; A2-s2-d1; A2-s3-d0; A2-s3-d1; B-s1-d0; B-s1-d1; B-s2-d0; B-s2-d1.
Hardly combustible materials: A2-s1-d2; A2-s2-d2; A2-s3-d2; B-s1-d2; B-s2-d2; B-s3-d0; B-s3-d1; B-s3-d2; C-s1-d0; C-s1-d1; C-s2-d0; C-s2-d1.
Flammable fuel materials: C-s1-d2; C-s2-d2; C-s3-d0; C-s3-d1; C-s3-d2; D-s1-d0; D-s1-d1; D-s2-d0; D-s2-d1.
CERTIFICATIONS
DESCRIPTION
ITA
ENG
Non-combustible material
Hardly-combustible material
Hardly-combustible material
Flammable fuel material
Easily flammable fuel material
Extremely easily flammable fuel material
class 0
class 1
class 2
class 3
class 4
class 5
A1
A2-s1-d0
A2-s1-d1
A2-s2-d0
A2-s2-d1
A2-s3-d0
A2-s2-d0
A2-s2-d1
A2-s3-d0
A2-s3-d1
B-s1-d0
B-s1-d1
B-s2-d0
B-s2-d1
A2-s1-d2
A2-s2-d2
A2-s3-d2
B-s1-d2
B-s2-d2
B-s3-d0
B-s3-d1
B-s3-d2
C-s1-d0
C-s1-d1
C-s2-d0
C-s2-d1
C-s1-d2
C-s2-d2
C-s3-d0
C-s3-d1
C-s3-d2
D-s1-d0
D-s1-d1
D-s2-d0
D-s2-d1
/
/
